|
|
Hot News Sheet
ISSUE # 1175
|
Head office will be closed Monday, August 4th for B.C. Day.
|
|
|
|
|
|
|
THE ROSE
|
Dimensions:
17' 4" x 7' 3" Stock # SF6234
The Sun Cat heritage is the famous Cape Cod Cat used in the early 1900's to work the Clam and scallop beds in rough waters of Vineyard and Nantucket Sound. These boats carried huge loads in all kinds of weather and sea conditions. They became known for their stability, amazing speed and ability to sail into a steep chop. This is a modern fiberglass version of the original design. They are know for their high quality and continued high value. It has a patented Quick rigging system for easy trailering for day use. Great for sleeping 2 over night, perfect for a gulf islands or lakes weekend get away without the expense of moorage and expensive annual hauls outs and maintenance.
$33,000(CAD)
Call
Pete Mathews
at 250-897-6483
|
|
|
|
|
|
|
|
Pacific Suite
|
Dimensions:
35' 10" x 10' 10" Stock # NF6236
Rebuilt/refreshed fiberglass Gillnetter. Owner has spent years rebuilding and refreshing this vessel inside and out. Great upholstery, Oak interior, good windows and lighting make the boat wonderful to live on. Engine room and exterior are clean and efficient with everything working right. Would also be a great recreational cruiser.
$65,000(CAD)
Call
Harry Mose
at 250-927-1545
|
|
|
|
|
|
|
|
Ocean Tribe
|
Dimensions:
43' x 15' Stock # WA6235
Strongly built all aluminum landing craft. Large cargo area will take full size vehicles plus more. Good size wheelhouse and galley/sitting/sleeping area to make any trip more comfortable. Control station on top wheelhouse and a bowthruster make tight spots no problem. This is an ideal unit for day or for 3 day trips. High sides will keep things dry.
$598,000(CAD)
Call
Harry Mose
at 250-927-1545
|
|
|
|
|
|
|
Pontoon Barge
|
Dimensions:
32' x 10' Stock # WA6233
All aluminum pontoon barge. Has hideaway gangplank forward for going ashore and pontoons are armoured for same. Engines are outfitted with 12 volt electric/hydraulic lift and trim rams. Comes with it's own customized tri-axle Road Runner trailer.
$80,000(CAD)
Call
Harry Mose
at 250-927-1545
|
|
|
|
|
|
|
|
Grafton 1
|
Dimensions:
56' x 14' Stock # WS6228
Grafton 1 is a workhorse steel Landing Craft. The Grafton 1 has seen steady upkeep. Ready for cargo deliveries for the buyer after October 31st, 2025. Comes with 1 main winch in the engine room and 2 winches to lift and lower spuds.
Reduced to $274,999(USD)
Call
Margaret Harris
at 907-942-5310
|
|
|
|
|
|
|
Silver Token
|
Dimensions:
40' x 10' 10" Stock # LF6168
40 ft Pelagic built fiberglass shrimp gillnetter with shrimp licence. Powered by TMD 100 Volvo with 200 hp.
Package price: Reduced to $65,000(CAD)
Call
Doug Beguin
at 250-927-8442
Jim Armer
at 250-954-8061
|
|
|
|
|
|
|
Lady G1
|
Dimensions:
41' x 12' Stock # SF6196
1983 Fraser 41 that has been well maintained. Built by De Kleer Brothers and powered by an Isuzu C-190 48hp with fresh water cooling. Double V-Berth forward, large quarter berth aft starboard and head with shower. Pride of ownership is evident on this vessel and current owners enjoyed many trips on her, including Florida and back.
Reduced to $64,000(CAD)
Call
Dustin Speed
at 250-812-7946
|
|
|
|
|
|
|
Missing Linque
|
Dimensions:
29' 6" x 10' 11" Stock # PF6216
Missing Linque is a meticulously maintained vessel with near new Yanmar diesel power at only 253 hrs. Previously this vessel originally had twin diesel engines, they were replaced with a much more powerful and fuel efficient Yanmar 315 hp turbo diesel. It also had a bow thruster installed for easy docking. This upgrade was done in 2015. The rest of the vessel has be very well kept and stored indoors in a heated facility for most of its life (since 1990). It comes fully equipped with everything you need to go cruising just top up with fuel and provisions and go!
Reduced to $109,000(CAD)
Call
Pete Mathews
at 250-897-6483
|
|
|
|
|
|
|
Info
|
Length
|
Package?
|
Will Sell Licence
Only
|
Lease Only
|
Stock # 3065-Lic Licence C - SCHEDULE II SPECIES by Hook and Line
Licence
$20,000(CAD)
|
37'8"
|
|
YES
|
|
|
|
|
|
|
|